Microscope Dust Cover for AmScope SM-8BZ-144S 2015-2026 | Black Oxford Cloth, Adjustable Bottom Drawstring and Cord Lock Help Keep Equipment Covered During Storage.

📏【Applicable Models】Microscope dust cover for AmScope SM-8BZ-144S 2015-2026. Check its outline, including eyepiece tubes, a screen, focus knobs, the stage, and parts extending beyond the main body. Custom sizing is available in length, width, and height. Measure the widest, deepest, and tallest points to choose dimensions based on your equipment rather than relying on a model name alone.

🧹【Everyday Dust Coverage】Keep your microscope covered between uses with black Oxford cloth draped over its upper body and sides. The fabric layer helps reduce dust settling on exposed surfaces while the equipment is stored or idle. Place the cover over the instrument after use and lift it off before operation. This simple storage step is suited to a shared lab bench or equipment table when the microscope is not being used.

💪【Adjustable Bottom Drawstring】Gather the lower opening by pulling the drawstring, then use the attached cord lock to adjust it around the microscope's base. This design helps reduce the open gap at the bottom and can help keep the cover positioned during storage. The cord sits at the lower edge for access when putting the cover on or taking it off. Keep the drawstring clear of controls and moving parts while the microscope is stored.

📦【Coverage For Main Microscope Body】The box-shaped fabric profile drapes over the microscope's upper body and side panels while the instrument is not in use. It provides an outer covering for the main equipment, rather than separate covers for individual eyepieces, lenses, knobs, or accessories. Check that the cover's shape leaves enough room for the equipment's overall form, and remove it before operating the microscope.

🏫【Storage Between Uses】Keep the instrument covered when it is set aside in a laboratory, classroom, research workspace, or home study area. The black fabric exterior gives the equipment a consistent covered appearance on a bench or storage table. Place the cover on after work and remove it before switching the microscope on. During storage, position the lower drawstring away from all controls, cables, and moving parts.