O'SKOOL Drill Press Table with Adjustable Aluminum Fence and Flip Stop | More Support for Repeated Drilling with a 23-5/8x15x1 in MDF Surface,Hold-Down Clamps and an Insert that Levels Flush,DAB022

Expanded Work Support. This drill press table adds a 23-5/8 x 15 x 1 in MDF surface over an existing cast-iron table, providing more room to support and position wood workpieces during drilling

Reposition the Drill Press Fence with More Control: Low-friction tape reduces direct contact between the 23-1/2 in aluminum fence and MDF surface, while the guide bar and bearings help guide movement during adjustment

Set Repeated Hole Locations with Less Re-Measuring: Use the insert reference line to relate the fence to the drill-bit position, then set the flip stop as an end reference for similar workpieces

Clamps And Replaceable Insert. Two 15 in T-tracks position the included 0–2-1/2 in hold-down clamps. Replace the worn 4 x 4 x 3/8 in sacrificial insert with 3/8 in plywood or MDF, then use the four leveling screws to set it flush

Clamps And Replaceable Insert. Two 15 in T-tracks position the included 0–2-1/2 in hold-down clamps. Replace the worn 4 x 4 x 3/8 in sacrificial insert with 3/8 in plywood or MDF, then use the four leveling screws to set it flush