Fsp Group Fsp090m-rba Used Tested

AUTOMATIC MODE. Once the sump pump is plugged in, it will automatically start when the water level is above 4" and shut off when it reaches the stop level of 2". When you start to use this pump, tilt and submerge it in water for a few seconds to expel the air inside

MANUAL MODE. If the water level is not high enough to start in auto mode or you want to remove water as low as possible (1/2"), you can switch to manual control. The pump will keep running continuously and will not turn off automatically, so remember to cut off the power immediately to prevent the motor from burning out

POWERFUL PERFORMANCE. 3/4 HP POWERFUL MOTOR ensures effective pumping. The pump has a maximum capacity of transferring water up to 3300 GPH with 1-1/2" discharge hose horizontally. It can lift water up to a maximum vertical height of 29'. This submersible pump works with clean water or slightly dirty water, and its bottom grid allows it to pass up to 1/5" solids

SAFETY ENSURE & RELIABLE. UPGRADED SEALING STRUCTURE gives pump longer durability, which is much longer than regular mechanical seal. Full corrosion-resistant shell and THERMAL PROTECTION ensures the pump will not be burned out, even when the pump triggers thermal overload protector, the pump will rework after cooling down

EASY INSTALLATION. Comes with three plastic adapters: GHT 3/4"+NPT 1" connects standard garden hose for quick installation; G 1-1/2" discharge port connects discharge hose for high capacity pumping. The check valve prevents pumped water from running back into the pump