ELEGOO 0.96 Inch OLED Display Screen Module, Self-Luminous, SSD1306, 3PCS | Compatible with Arduino, I2C OLEDs Display Mini Screens, 128x64, Yellow Blue, 3.3-5V Power, 0x3C Address and 10 Wires

Three Displays For More Projects. Build a sensor dashboard, robot status panel and classroom demo at the same time, or keep spare modules ready for testing; each compact screen delivers 128x64 graphics with self-luminous pixels and no backlight

Fixed Yellow-Blue Zones Make Status Information Easy To Scan: Use the yellow upper band for headings, alerts or icons and the blue lower area for readings and menus; the display colors are fixed by the OLED panel rather than programmable RGB, and the screen does not support touch input

Four-Wire I2C Connection Saves Controller Pins: Connect GND, VCC, SCL and SDA according to the module labels, scan the I2C bus and use the default 7-bit address 0x3C; the 0x78 PCB marking represents the corresponding 8-bit write-address format used by some documentation

Works With Common 3.3 V & 5 V Project Platforms: Add compact visual feedback to compatible microcontroller and single-board computer projects, but verify the module pin order, supply voltage, I2C logic levels, pull-up voltage and SSD1306 software configuration before powering

Three Modules Plus Ten Dupont Wires: Includes 3 OLED display modules, 5 female-to-female and 5 male-to-female jumper wires; controller boards, breadboards and enclosures are not included, and multiple displays on one I2C bus require unique addresses where supported or an I2C multiplexer