Rode RODECaster Pro 2 White Podcast Mixer Bundle with PDM-3 Mic & Arm

IN THE BOX. 1x Rode RODECaster Pro 2 White console, 1x StreamEye PDM-3 mic package (cardioid dynamic XLR microphone, desktop tripod stand, XLR cable, Cans50 closed-back headphones), 1x StreamEye LowPro mic arm with adjustable clamp and two thread adapter nuts, 1x 32GB microSDHC card with SD adapter, 1x power adaptor, 1x SC27 USB-C cable. A one-host podcast desk.

XLR MIC TO COMBO INPUT, NOTHING IN BETWEEN: The PDM-3 is dynamic, so no phantom power is required and no separate interface sits in the chain - the lead that ships with it runs from the microphone to the console and that is the whole signal path. Monitoring goes to one of four 1/4-inch headphone outputs on the front, each on its own level.

BROADCAST VOICE SHAPING ON BOARD. APHEX Aural Exciter, Big Bottom and Compellor sit alongside a compressor, gate, de-esser, high-pass filter and 3-band EQ, all dialed from three VoxLab sliders on the 5.5-inch HD touchscreen. Revolution Preamps supply 0-76 dB at a -131.5 dBV EIN noise floor, so a cardioid dynamic arrives at level with nothing inline.

ADJUSTABLE CLAMP EXPANDS TO 3.15 IN (80 MM): The LowPro arm mounts with no drilling, swings a full 360 degrees, and multi-angle joints hold the mic at speaking distance seated or standing. Three lock-catch channels route the mic lead along the arm, two thread adapter nuts fit standard mounts, and the package tripod stand is the fallback.

GROWS TO FOUR WIRED HOSTS. Nine assignable channels take a Bluetooth phone caller, a RODE CallMe remote guest, a second computer on dual USB-C and a transmitter picked up by the built-in Series IV receiver, and three combo inputs stay open. Capture stereo or per-channel stems to the 32GB card, to USB or straight to a laptop at up to 192 kHz.