Right Angle Air Die Grinder With 22 pcs 2-inch Roll Lock Sanding Discs,1/4 inch Pneumatic Die Grinder Tool,Mini Angle Grinder Kit For Grinding,Polishing,Deburring

90 Degree Head for Tight Spots: the right angle head lays the 2 in disc flat on the work, so you can dress welds inside corners, frames, manifolds and cylinder ports a straight grinder cannot reach, and the aluminum body stays light overhead

Steady 20,000 RPM for Repeatable Results: at 90 PSI the air motor spins 20,000 RPM and makes short work of weld beads, rust scale and paint, so every pass cuts the same from the first part to the last

22 Pc Roll Lock Disc Set: 2 wool polishing pads, 5 flap discs in 80 grit, 15 nylon surface conditioning discs, 5 each in coarse, medium and fine, plus one 2 in Roll Lock backing pad, both 1/4 in and 1/8 in collets

Runs on Shop Air, Set Up in Minutes: 90 PSI working pressure, 3.5 CFM (100 L/min) air use and a 1/4 in NPT inlet; run a 3/8 in hose and add 2 to 3 drops of air tool oil at the inlet before each use to protect bearings and gears

Grind, Blend and Polish with One Tool: the 80 grit flap disc takes down weld beads and rust, the coarse, medium and fine nylon discs blend it to satin, then the wool pad brings up polish on stainless and aluminum